If you prefer you can find alternative pads that other brands supply them. Our caliper uses the same brake pads with the caliper commonly known as (CP7040D54).  Below is some of the few brands you will be able to find:
Project Mu HC+ / Part No. SH2607
Performance Friction / Part No. PFC 7877.97.17.44
Ferodo Racing / Part No. FRP3084X
Hawk / HB717B.660
AP Racing / Part No. APF404
*Note: The above information provided are for reference only.  Buyer is fully responsible to cross reference check for correct part number.

When ordering the pads from other brands, you will want to double check with the supplier and make sure the Pads fit CP7040D54. Because there is two spec on the market for the CP7040, one is the CP7040D61 and the other one is CP7040D54 (which is the pad you want to use). The difference between the two is the brake pad surface height, one is 54 to 55mm and the other is 58 to 61mm. You will want the pad surface height with 54~55mm. Hope the information helps.

 Our FC4 4-piston calipers uses the same size brake pads with the caliper commonly known as F40 caliper.  Below is some of the few brands you will be able to find:
Project Mu NS400 / Part No. PS4F1040
Hawk / Pat No. HB193
Brembo Ceramic / Part No. ST04R780-18
EBC Yellow Stuff / part No. DP41110R
*Note: The above information provided are for reference only.  Buyer is fully responsible to cross reference check for correct part number.

​Yes rebuild parts can be purchased at our website or directly thru our email sales@prodigywerks.com.  Other brands parts may fit but unfortunately we cannot gaurantee fitment of other brand's parts into our product.

Yes the discs/rotors are replaceable.  You can just purchase the discs/rotors itself without the hat and floating parts directly at our website or email us at sales@prodigywerks.com.